openssl_x509_crl Resource
This page is generated from the Chef Infra Client source code.To suggest a change, edit the openssl_x509_crl.rb file and submit a pull request to the Chef Infra Client repository.
Use the openssl_x509_crl resource to generate PEM-formatted x509 certificate revocation list (CRL) files.
New in Chef Infra Client 14.4.
Syntax
The full syntax for all of the properties that are available to the openssl_x509_crl resource is:
openssl_x509_crl 'name' do
ca_cert_file String
ca_key_file String
ca_key_pass String
expire Integer # default value: 8
group String, Integer
mode Integer, String
owner String, Integer
path String # default value: 'name' unless specified
renewal_threshold Integer # default value: 1
revocation_reason Integer # default value: 0
serial_to_revoke Integer, String
action Symbol # defaults to :create if not specified
end
where:
openssl_x509_crl
is the resource.name
is the name given to the resource block.action
identifies which steps Chef Infra Client will take to bring the node into the desired state.ca_cert_file
,ca_key_file
,ca_key_pass
,expire
,group
,mode
,owner
,path
,renewal_threshold
,revocation_reason
, andserial_to_revoke
are the properties available to this resource.
Actions
The openssl_x509_crl resource has the following actions:
:create
- Create the certificate revocation list (CRL) file. (default)
:nothing
- This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.
Properties
The openssl_x509_crl resource has the following properties:
ca_cert_file
- Ruby Type: String |
REQUIRED
The path to the CA X509 Certificate on the filesystem. If the
ca_cert_file
property is specified, theca_key_file
property must also be specified, the CRL will be signed with them.
ca_key_file
- Ruby Type: String |
REQUIRED
The path to the CA private key on the filesystem. If the
ca_key_file
property is specified, theca_cert_file
property must also be specified, the CRL will be signed with them.
ca_key_pass
- Ruby Type: String
The passphrase for CA private key’s passphrase.
expire
- Ruby Type: Integer | Default Value:
8
Value representing the number of days from now through which the issued CRL will remain valid. The CRL will expire after this period.
group
- Ruby Type: String, Integer
The group permission for the CRL file.
mode
- Ruby Type: Integer, String
The permission mode of the CRL file.
owner
- Ruby Type: String, Integer
The owner permission for the CRL file.
path
- Ruby Type: String | Default Value:
The resource block's name
An optional property for specifying the path to write the file to if it differs from the resource block’s name.
renewal_threshold
- Ruby Type: Integer | Default Value:
1
Number of days before the expiration. It this threshold is reached, the CRL will be renewed.
revocation_reason
- Ruby Type: Integer | Default Value:
0
Reason for the revocation.
serial_to_revoke
- Ruby Type: Integer, String
Serial of the X509 Certificate to revoke.
Common Resource Functionality
Chef resources include common properties, notifications, and resource guards.
Common Properties
The following properties are common to every resource:
compile_time
Ruby Type: true, false | Default Value:
false
Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the
compile phase
). Set to false to run while Chef Infra Client is configuring the node (theconverge phase
).ignore_failure
Ruby Type: true, false, :quiet | Default Value:
false
Continue running a recipe if a resource fails for any reason.
:quiet
will not display the full stack trace and the recipe will continue to run if a resource fails.retries
Ruby Type: Integer | Default Value:
0
The number of attempts to catch exceptions and retry the resource.
retry_delay
Ruby Type: Integer | Default Value:
2
The delay in seconds between retry attempts.
sensitive
Ruby Type: true, false | Default Value:
false
Ensure that sensitive resource data is not logged by Chef Infra Client.
Notifications
notifies
Ruby Type: Symbol, 'Chef::Resource[String]'
A resource may notify another resource to take action when its state changes. Specify a
'resource[name]'
, the:action
that resource should take, and then the:timer
for that action. A resource may notify more than one resource; use anotifies
statement for each resource to be notified.If the referenced resource does not exist, an error is raised. In contrast,
subscribes
will not fail if the source resource is not found.
A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:
:before
Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed
Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate
,:immediately
Specifies that a notification should be run immediately, for each resource notified.
The syntax for notifies
is:
notifies :action, 'resource[name]', :timer
subscribes
Ruby Type: Symbol, 'Chef::Resource[String]'
A resource may listen to another resource, and then take action if the
state of the resource being listened to changes. Specify a
'resource[name]'
, the :action
to be taken, and then the :timer
for
that action.
Note that subscribes
does not apply the specified action to the
resource that it listens to - for example:
file '/etc/nginx/ssl/example.crt' do
mode '0600'
owner 'root'
end
service 'nginx' do
subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end
In this case the subscribes
property reloads the nginx
service
whenever its certificate file, located under
/etc/nginx/ssl/example.crt
, is updated. subscribes
does not make any
changes to the certificate file itself, it merely listens for a change
to the file, and executes the :reload
action for its resource (in this
example nginx
) when a change is detected.
If the other resource does not exist, the subscription will not raise an
error. Contrast this with the stricter semantics of notifies
, which
will raise an error if the other resource does not exist.
A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:
:before
Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed
Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate
,:immediately
Specifies that a notification should be run immediately, for each resource notified.
The syntax for subscribes
is:
subscribes :action, 'resource[name]', :timer
Guards
A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:
- A string is executed as a shell command. If the command returns
0
, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may returntrue
in addition to0
. - A block is executed as Ruby code that must return either
true
orfalse
. If the block returnstrue
, the guard property is applied. If the block returnsfalse
, the guard property is not applied.
A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.
PropertiesThe following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:
not_if
Prevent a resource from executing when the condition returns
true
.only_if
Allow a resource to execute only if the condition returns
true
.
Examples
The following examples demonstrate various approaches for using the openssl_x509_crl resource in recipes:
Create a certificate revocation file
openssl_x509_crl '/etc/ssl_test/my_ca.crl' do
ca_cert_file '/etc/ssl_test/my_ca.crt'
ca_key_file '/etc/ssl_test/my_ca.key'
end
Create a certificate revocation file for a particular serial
openssl_x509_crl '/etc/ssl_test/my_ca.crl' do
ca_cert_file '/etc/ssl_test/my_ca.crt'
ca_key_file '/etc/ssl_test/my_ca.key'
serial_to_revoke C7BCB6602A2E4251EF4E2827A228CB52BC0CEA2F
end