habitat_package Resource
This page is generated from the Chef Infra Client source code.To suggest a change, edit the habitat_package.rb file and submit a pull request to the Chef Infra Client repository.
Use the habitat_package to install or remove Chef Habitat packages from Habitat Builder.
New in Chef Infra Client 17.3.
Syntax
The full syntax for all of the properties that are available to the habitat_package resource is:
habitat_package 'name' do
auth_token String
binlink true, false, force # default value: false
bldr_url String # default value: "https://bldr.habitat.sh"
channel String # default value: "stable"
exclude String
keep_latest String
no_deps true, false # default value: false
options String
package_name String, Array
source String
timeout String, Integer
version String, Array
action Symbol # defaults to :install if not specified
end
where:
habitat_package
is the resource.name
is the name given to the resource block.action
identifies which steps Chef Infra Client will take to bring the node into the desired state.auth_token
,binlink
,bldr_url
,channel
,exclude
,keep_latest
,no_deps
,options
,package_name
,source
,timeout
, andversion
are the properties available to this resource.
Actions
The habitat_package resource has the following actions:
:install
- Install a package. If a version is specified, install the specified version of the package. (default)
:nothing
- This resource block does not act unless notified by another resource to take action. Once notified, this resource block either runs immediately or is queued up to run at the end of a Chef Infra Client run.
:purge
- Purge a package. This action typically removes the configuration files as well as the package.
:reconfig
- Change the installed package
:remove
- Remove a package.
:upgrade
- Install a package and ensure that a package is the latest version.
Properties
The habitat_package resource has the following properties:
auth_token
- Ruby Type: String
Auth token for installing a package from a private organization on Habitat builder.
binlink
- Ruby Type: true, false, force | Default Value:
false
If habitat should attempt to binlink the package. Acceptable values:
true
,false
,:force
. Will fail on binlinking if set totrue
and binary or binlink exists.
bldr_url
- Ruby Type: String | Default Value:
https://bldr.habitat.sh
The habitat builder url where packages will be downloaded from. Defaults to public Habitat Builder
channel
- Ruby Type: String | Default Value:
stable
The release channel to install your package from.
exclude
- Ruby Type: String
Identifier of one or more packages that should not be uninstalled. (ex: core/redis, core/busybox-static/1.42.2/21120102031201)
keep_latest
- Ruby Type: String
Ability to uninstall while retaining a specified version This feature only works in Habitat 1.5.86+.
no_deps
- Ruby Type: true, false | Default Value:
false
Remove package but retain dependencies.
options
- Ruby Type: String
Pass any additional parameters to the habitat package command.
package_name
- Ruby Type: String, Array
An optional property to set the package name if it differs from the resource block’s name.
source
- Ruby Type: String
The optional path to a package on the local file system.
timeout
- Ruby Type: String, Integer
The amount of time (in seconds) to wait before timing out.
version
- Ruby Type: String, Array
The version of a package to be installed or upgraded.
Common Resource Functionality
Chef resources include common properties, notifications, and resource guards.
Common Properties
The following properties are common to every resource:
compile_time
Ruby Type: true, false | Default Value:
false
Control the phase during which the resource is run on the node. Set to true to run while the resource collection is being built (the
compile phase
). Set to false to run while Chef Infra Client is configuring the node (theconverge phase
).ignore_failure
Ruby Type: true, false, :quiet | Default Value:
false
Continue running a recipe if a resource fails for any reason.
:quiet
will not display the full stack trace and the recipe will continue to run if a resource fails.retries
Ruby Type: Integer | Default Value:
0
The number of attempts to catch exceptions and retry the resource.
retry_delay
Ruby Type: Integer | Default Value:
2
The delay in seconds between retry attempts.
sensitive
Ruby Type: true, false | Default Value:
false
Ensure that sensitive resource data is not logged by Chef Infra Client.
Notifications
notifies
Ruby Type: Symbol, 'Chef::Resource[String]'
A resource may notify another resource to take action when its state changes. Specify a
'resource[name]'
, the:action
that resource should take, and then the:timer
for that action. A resource may notify more than one resource; use anotifies
statement for each resource to be notified.If the referenced resource does not exist, an error is raised. In contrast,
subscribes
will not fail if the source resource is not found.
A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:
:before
Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed
Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate
,:immediately
Specifies that a notification should be run immediately, for each resource notified.
The syntax for notifies
is:
notifies :action, 'resource[name]', :timer
subscribes
Ruby Type: Symbol, 'Chef::Resource[String]'
A resource may listen to another resource, and then take action if the
state of the resource being listened to changes. Specify a
'resource[name]'
, the :action
to be taken, and then the :timer
for
that action.
Note that subscribes
does not apply the specified action to the
resource that it listens to - for example:
file '/etc/nginx/ssl/example.crt' do
mode '0600'
owner 'root'
end
service 'nginx' do
subscribes :reload, 'file[/etc/nginx/ssl/example.crt]', :immediately
end
In this case the subscribes
property reloads the nginx
service
whenever its certificate file, located under
/etc/nginx/ssl/example.crt
, is updated. subscribes
does not make any
changes to the certificate file itself, it merely listens for a change
to the file, and executes the :reload
action for its resource (in this
example nginx
) when a change is detected.
If the other resource does not exist, the subscription will not raise an
error. Contrast this with the stricter semantics of notifies
, which
will raise an error if the other resource does not exist.
A timer specifies the point during a Chef Infra Client run at which a notification is run. The following timers are available:
:before
Specifies that the action on a notified resource should be run before processing the resource block in which the notification is located.
:delayed
Default. Specifies that a notification should be queued up, and then executed at the end of a Chef Infra Client run.
:immediate
,:immediately
Specifies that a notification should be run immediately, for each resource notified.
The syntax for subscribes
is:
subscribes :action, 'resource[name]', :timer
Guards
A guard property can be used to evaluate the state of a node during the execution phase of a Chef Infra Client run. Based on the results of this evaluation, a guard property is then used to tell Chef Infra Client if it should continue executing a resource. A guard property accepts either a string value or a Ruby block value:
- A string is executed as a shell command. If the command returns
0
, the guard is applied. If the command returns any other value, then the guard property is not applied. String guards in a powershell_script run Windows PowerShell commands and may returntrue
in addition to0
. - A block is executed as Ruby code that must return either
true
orfalse
. If the block returnstrue
, the guard property is applied. If the block returnsfalse
, the guard property is not applied.
A guard property is useful for ensuring that a resource is idempotent by allowing that resource to test for the desired state as it is being executed, and then if the desired state is present, for Chef Infra Client to do nothing.
PropertiesThe following properties can be used to define a guard that is evaluated during the execution phase of a Chef Infra Client run:
not_if
Prevent a resource from executing when the condition returns
true
.only_if
Allow a resource to execute only if the condition returns
true
.
Examples
The following examples demonstrate various approaches for using the habitat_package resource in recipes:
Install core/redis
habitat_package 'core/redis'
Install specific version of a package from the unstable channel
habitat_package 'core/redis' do
version '3.2.3'
channel 'unstable'
end
Install a package with specific version and revision
habitat_package 'core/redis' do
version '3.2.3/20160920131015'
end
Install a package and force linking it’s binary files to the system path
habitat_package 'core/nginx' do
binlink :force
end
Install a package and link it’s binary files to the system path
habitat_package 'core/nginx' do
options '--binlink'
end
Remove package and all of it’s versions
habitat_package 'core/nginx'
action :remove
end
Remove specified version of a package
habitat_package 'core/nginx/3.2.3'
action :remove
end
Remove package but retain some versions Note: Only available as of Habitat 1.5.86
habitat_package 'core/nginx'
keep_latest '2'
action :remove
end
**Remove package but keep dependencies**
habitat_package 'core/nginx'
no_deps false
action :remove
end