Skip to main content

aws_network_firewall_rule_group Resource

Use the aws_network_firewall_rule_group InSpec audit resource to test properties of a single specific AWS Network Firewall rule group.

The AWS::NetworkFirewall::RuleGroup resource defines a reusable collection of stateless or stateful network traffic filtering rules.

For additional information, including details on parameters and properties, see the AWS documentation on AWS Network Firewall Rule Group.

Install

This resource is available in the Chef InSpec AWS resource pack.

For information on configuring your AWS environment for Chef InSpec and creating an InSpec profile that uses the InSpec AWS resource pack, see the Chef InSpec documentation on the AWS cloud platform.

Syntax

Ensure that the firewall exists.

describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
  it { should exist }
end

Parameters

rule_group_name (required)

The descriptive name of the rule group.

Properties

update_token
A token used for optimistic locking.
rule_group.rule_variables.ip_sets
A list of IP addresses and address ranges, in CIDR notation.
rule_group.rule_variables.ip_sets["RuleVariableName"].definition
The list of IP addresses and address ranges, in CIDR notation.
rule_group.rule_variables.port_sets
A list of port ranges.
rule_group.rule_variables.port_sets["RuleVariableName"].definition
The set of port ranges.
rule_group.rules_source.rules_string
Stateful inspection criteria, provided in Suricata compatible intrusion prevention system (IPS) rules.
rule_group.rules_source.rules_source_list.targets
The domains that you want to inspect for in your traffic flows.
rule_group.rules_source.rules_source_list.target_types
The protocols you want to inspect. Specify TLS_SNI for HTTPS.
rule_group.rules_source.rules_source_list.generated_rules_type
Whether you want to allow or deny access to the domains in your target list.
rule_group.rules_source.stateful_rules
The 5-tuple stateful inspection criteria.
rule_group.rules_source.stateful_rules.first.action
Defines what Network Firewall should do with the packets in a traffic flow when the flow matches the stateful rule criteria.
rule_group.rules_source.stateful_rules.first.header.protocol
The protocol to inspect for.
rule_group.rules_source.stateful_rules.first.header.source
The source IP address or address range to inspect for, in CIDR notation.
rule_group.rules_source.stateful_rules.first.header.source_port
The source port to inspect for.
rule_group.rules_source.stateful_rules.first.header.direction
The direction of traffic flow to inspect.
rule_group.rules_source.stateful_rules.first.header.destination
The destination IP address or address range to inspect for, in CIDR notation.
rule_group.rules_source.stateful_rules.first.header.destination_port
The destination port to inspect for.
rule_group.rules_source.stateful_rules.first.rule_options
Additional settings for a stateful rule.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules
Defines the set of stateless rules for use in a stateless rule group.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.sources
The source IP addresses and address ranges to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.sources.first.address_definition
Specify an IP address or a block of IP addresses in Classless Inter-Domain Routing (CIDR) notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destinations
The destination IP addresses and address ranges to inspect for, in CIDR notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destinations.first.address_definition
Specify an IP address or a block of IP addresses in Classless Inter-Domain Routing (CIDR) notation.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports
The source ports to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports.first.from_port
The lower limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.source_ports.first.to_port
The upper limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports
The destination ports to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports.first.from_port
The lower limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.destination_ports.first.to_port
The upper limit of the port range.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.protocols
The protocols to inspect for, specified using each protocol’s assigned internet protocol number (IANA).
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags
The TCP flags and masks to inspect for.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags.first.flags
Used in conjunction with the Masks setting to define the flags that must be set and flags that must not be set in order for the packet to match.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.match_attributes.tcp_flags.first.masks
The set of flags to consider in the inspection.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.rule_definition.actions
The actions to take on a packet that matches one of the stateless rule definition’s match attributes.
rule_group.rules_source.stateless_rules_and_custom_actions.stateless_rules.first.priority
A setting that indicates the order in which to run this rule relative to all of the rules that are defined for a stateless rule group.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions
Defines an array of individual custom action definitions that are available for use by the stateless rules in this StatelessRulesAndCustomActions specification.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_name
The descriptive name of the custom action.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_definition.publish_metric_action.dimensions
The value to use in an Amazon CloudWatch custom metric dimension.
rule_group.rules_source.stateless_rules_and_custom_actions.custom_actions.first.action_definition.publish_metric_action.dimensions.first.value
The value to use in the custom metric dimension.
rule_group_response.rule_group_arn
The Amazon Resource Name (ARN) of the rule group.
rule_group_response.rule_group_name
The descriptive name of the rule group.
rule_group_response.rule_group_id
The unique identifier for the rule group.
rule_group_response.description
A description of the rule group.
rule_group_response.type
Indicates whether the rule group is stateless or stateful.
rule_group_response.capacity
The maximum operating resources that this rule group can use.
rule_group_response.rule_group_status
Detailed information about the current status of a rule group.
rule_group_response.tags
The key:value pairs to associate with the resource.

Examples

Ensure an update token is available.

describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
  its('update_token') { should eq 'UPDATE_TOKEN' }
end

Ensure that the rule group arn is RuleGroupARN.

describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
    its('rule_group_response.rule_group_arn') { should eq 'ARN' }
end

Matchers

For a full list of available matchers, see our Universal Matchers page.

The controls will pass if the describe method returns at least one result.

exist

Use should to test that the entity exists.

describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
  it { should exist }
end

Use should_not to test the entity does not exist.

describe aws_network_firewall_rule_group(rule_group_name: 'dummy') do
  it { should_not exist }
end

be_available

Use should to check if the entity is available.

describe aws_network_firewall_rule_group(rule_group_name: "RULE_GROUP_NAME") do
  it { should be_available }
end

AWS Permissions

Your Principal will need the NetworkFirewall:Client:DescribeRuleGroupResponse action with Effect set to Allow.

Edit this page on GitHub

Thank you for your feedback!

×









Search Results